Mitsubishi S4S Service Manual page 57

Return
pipe
(2) Exhaust manifold
Remove the bolts that hold exhaust manifold to
the cylinder head. Remove the manifold and
gasket from the head.
(3) Fuel filter
(a) Disconneet fuel pipes and from the fuel filter.
(b) Remove fuel filter complete with bracket
from the inlet manifold.
(4) Fuel injection pipes
(a) Remove pipe clamps and disconneet injection
pipes from the injection pump and nozzle
holders.
(b) Disconneet leak-off pipe.
(c) Disconneet return pipe.
,-------llLtCAUTION
) f - - - - - - - - .
Be sure to put rubber caps over the openings of
the injection pump and nozzle holders to prevent
dust from getting inside the fuel system.
(5) Inlet manifold
Remove the bolts that hold inlet manifold to the
cylinder head. Remove the manifold and gasket
from the cylinder head.
ENGINE AUXILlARIES REMOVAL AND INSTALLATION
Exhaust
manifold
Removing exhaust manifold
Removing fuel filter
Removing fuel injection pipes
Removing inlet manifold
6-3