Mitsubishi S4S Service Manual page 61

3. Engine Auxiliaries Installation
To install the engine auxiliaries, follow the
removal procedures in reverse. After installation,
service them as follows:
(a) Refill the engine with the recommended oil
up to the specified level.
(b) Refill the cooling system with coolant.
(c) Check each pipe conneetion for oil or coolant
leaks.
(d) Prime the fuel system.
(e) To installation of the fuel injection pump is
described below. After installing the fuel
injection pumps, be sure to inspeet and adjust
the injection timing. (Refer to Section 1.3 of
Group 5, "Adjustment, Bench Testing, and
Performance Tests."
ENGINE AUXILlARIES REMOVALAND INSTALLATION
6-7