26.
ADJUSTING THE X BELT PRESSER
Move the X pulse motor gear in the direction shown in the illustration, then move the X carriage and tighten the X belt
presser screw at the point where the initial rubber contacts the X pulse motor gear. After the X carriage is moved to
the left, be sure that the X pulse motor gear does not contact the initial rubber.
27.
ADJUSTING THE Y BELT PRESSER
Move the Y pulse motor gear in the direction shown in the illustration, then move the Y carriage and tighten the Y belt
presser screw at the point where the initial rubber contacts the Y pulse motor gear. After the Y carriage is moved to
the left, be sure that the Y pulse motor gear does not contact the initial rubber.
-45-