When Copying Onto Ohp Transparencies Or Thick Paper - Ricoh AFICIO 1055 Operating Instructions Manual

F Press the [OK] key.
D D D D
Set your originals, then press the { { { { Start} } } } key.
E E E E
When your copy job is finished, press the { { { { Clear Modes/Energy Saver} } } } key to
clear the settings.

When Copying onto OHP Transparencies or Thick Paper

To make copies onto OHP transparencies or thick paper, you need to specify the
paper type.
Limitation
❒ When you select "OHP" or "Thick Paper", copy paper is delivered face up
even if you have set the "Face-Up/Down Selection in Bypass Mode" setting
to "Face Down Exit". See "Face-Up/Down Selection in Bypass Mode" in ⇒
p.311 "Count Manager".
Note
❒ Select [Thick Paper] if the paper weight is more than 105 g/m
A A A A
Open the bypass tray, and adjust the guides to the paper size.
Important
❒ If the guides are not flush with the copy paper, a skew image or paper mis-
feeds might occur.
B B B B
Lightly insert the OHP transparencies or thick paper face up until the beep-
er sounds.
The k k indicator on the display automatically goes on.
k k
Note
❒ When you set an OHP transparency, make sure that its front and back faces
are properly positioned.
❒ To avoid paper misfeeds, fan the paper before setting it in the tray.
C C C C
Press the { { { { #} } } } key.
D D D D
Select [OHP] or [Thick Paper].
Copying from the Bypass Tray
2
, 28 lb. Bond.
2
73