Turning On The Computer - IBM IntelliStation E Pro 6216 Installation Manual

The following illustration shows the input/output (I/O) connectors on the front of the
IntelliStation E Pro Type 6226 computer.
The following illustration shows the input/output (I/O) connectors on the rear of the
IntelliStation E Pro Type 6226 computer.
Your computer has one keyboard connector on the back of the computer. Use this
connector to attach a keyboard. You can also connect an optional USB keyboard to
the computer using one of the USB connectors. After installing a USB keyboard,
you might need to use the Configuration/Setup Utility program to enable
keyboardless operation and prevent the POST error message 301 from being
displayed during setup. For detailed information about this option and how to
connect it to your computer, see the documentation that comes with the option.

Turning on the computer

After you connect the computer to a power source, the computer can start in either
of the following ways:
v You can press the power-control button on the front of the computer to start the
v If the computer is turned on and a power failure occurs, the computer will start
Power cord connector Mouse
Keyboard
computer.
automatically when power is restored.
Ethernet
USB 1
Parallel
Serial 2 Serial 1
USB 2
USB 1
and 2
USB 4
USB 3
Microphone
Video
Line in
Line out
Chapter 2. Installing the hardware
37