Turning On The Computer - IBM IntelliStation M Pro Installation Manual

Attention:
The following illustration shows the input/output (I/O) connectors on the rear of the
M Pro Type 6220 computer.
Keyboard
The following illustration shows the input/output (I/O) connectors on the rear of the
M Pro Type 6230 computer.
1394 IEEE
(FireWire) connector
Depending on the video adapter installed in your computer and the monitor you
want to use, you might need to use special video cables that convert signals or
provide an additional connection point for dual-monitor capability. See the User's
Guide on the IBM IntelliStation Documentation CD and the documentation that
comes with your monitor for additional information.

Turning on the computer

When the computer is connected to an ac power source but is not turned on, the
operating system does not run, and all core logic is shut down; however, the
computer can respond to requests, such as a remote request to turn on the
computer. The power-on LED flashes to indicate that the computer is connected to
an ac power source but is not turned on (standby mode).
To prevent damage to equipment, connect the power cord last.
IEEE 1394
(FireWire) connector
Mouse Parallel Ethernet
Serial connectors
Power cord
connector
Mouse
Keyboard
Parallel
Serial
connectors
Ethernet
USBs
USBs
Line out
Line in
Mic
Video
Line in Microphone
USBs Line out
1394
Video Power cord connector
Chapter 2. Installing the hardware
41