IBM IntelliStation E Pro 6216 Installation Manual page 39

9. Carefully grasp the adapter by the top edge or upper corners, and align it with
the expansion slot guides; then, press the adapter firmly into the expansion
slot.
Expansion-slot cover
Attention: Be certain that the adapter is correctly seated in the expansion slot
before you turn on the computer. Incomplete installation of an adapter might
damage the system board or the adapter.
10. Connect required cables to the adapter.
11. If you have another adapter to install, repeat steps 1 through 12 on page 17. If
you have another option to install, do so now. Otherwise, complete the
remaining steps in this section.
12. Reinstall the rear-adapter-support bracket; then, rotate the bracket to the
closed (locked) position.
13. Return the drive bay cages to their original positions in the computer.
14. Replace the top cover. See "Replacing the cover" on page 35 for details.
15. Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
Installing a SCSI adapter: Complete the following steps to install an optional
SCSI adapter:
1. Complete steps 1 through 12 of "Installing an adapter" on page 26; then,
continue with step 2.
2. Connect the SCSI signal cable to the adapter and one or more of the signal
cable connectors to the rear of the SCSI devices.
Adapter-support bracket
Chapter 2. Installing the hardware
27