Turning On The Computer - IBM IntelliStation Z Pro 6223 Installation Manual

The following illustration shows the input/output (I/O) connectors on the rear of the
computer.
Mouse
Keyboard
USB
1 and 2
Serial 1
Parallel
Serial 2
USB
3 and 4
Line out
(green)
Line in
(blue)
Microphone
(pink)
Video
Depending on the video adapter that is installed in your computer and the monitor
that you want to use, you might have to use special video cables that convert
signals or provide an additional connection point for dual-monitor capability. See the
User's Guide on the IBM IntelliStation Documentation CD and the documentation
that comes with your monitor for additional information.

Turning on the computer

Note: When you connect the power cord to the computer and an ac power source,
the power-supply fan will run and continue to run when the computer is in standby
mode to provide cooling to the power supply.
When the computer is connected to an ac power source but is not turned on, the
operating system does not run, and all core logic is shut down; however, the
computer can respond to requests to turn on the computer. The power-on LED
flashes to indicate that the computer is connected to an ac power source but is not
turned on.
Notes:
1. Turn on all external devices, such as the monitor, before turning on the
2. The power-on LED on the front of the computer is lit when the computer is on
42
IntelliStation Z Pro Type 6223: Installation Guide
computer.
and while it is being turned on.
IEEE 1394A
(FireWire)
Optional serial or video
port knockout
Ethernet link
status LED
Ethernet
Ethernet transmit/
receive activity LED
SCSI knockout