Cardinal 205 Installation And Technical Manual page 34

SETUP AND CALIBRATION, CONT.
$9-0; ($9-0;) - Print Tab Settings
With $9-0; ($9-0;) displayed, press the TARE/
show the current setting 06. To skip configuring the Print Tab Settings and proceed to the
*$0 menu, press the TARE/
the ASTERISK/
UP ARROW
pressing the TARE/
ENTER
The general format for the input is A = YY.XX where A is the
character identifying the data printed, YY is the number of lines
down and XX is the number of spaces to the right.
NOTE! Enter 00 in either the YY or XX location to
disable the data from printing.
$69;> (Select Port for Printer)
Press the TARE/
ENTER
setting displayed is acceptable, press the TARE/
to save it. Otherwise, use the ASTERISK/
press the TARE/
ENTER
NOTE! Although either port can be used for the printer port, it is recommended to
use the bi-directional port 1 with a bi-directional cable.
-3`> (ID Prompt Print Location)
Press the TARE/
ENTER
the setting displayed is acceptable, press the TARE/
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.
0`0> (Consecutive Number Print Location)
Press the TARE/
ENTER
printing. If the setting displayed is acceptable, press the TARE/
Otherwise, use the ASTERISK/
location and then press the TARE/
96**> (Gross Weight Print Location)
Press the TARE/
ENTER
printing. If the setting displayed is acceptable, press the TARE/
Otherwise, use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new
location and then press the TARE/ENTER key to save it.
;9 > (Tare Weight Print Location)
Press the TARE/
ENTER
If the setting displayed is acceptable, press the TARE/
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.
0 ;> (Net Weight Print Location)
Press the TARE/
ENTER
If the setting displayed is acceptable, press the TARE/
use the ASTERISK/UP ARROW and UNITS/LEFT ARROW keys to input a new location and
then press the TARE/ENTER key to save it.
8200-M024-O1 Rev G y 205 Installation & Technical
30
key again. To configure the Print Tab Settings, press
ENTER
key (display will change to ( *) then the TARE/
key the display will change to $69;>.
key to show the current value. If the
UP ARROW
key to save it. Allowable values are: 1 or 2.
key to show the current setting for the location of ID prompt printing. If
key to show the current setting for the location of consecutive number
and UNITS/
UP ARROW
key to save it.
ENTER
key to show the current setting for the location of Gross weight
key to show the current setting for the location of Tare weight printing.
key to show the current setting for the location of Net weight printing.
key. The display will change to
ENTER
key again
ENTER
key to toggle to a new setting and then
key again to save it. Otherwise,
ENTER
key again to save it.
ENTER
keys to input a new
LEFT ARROW
key again to save it.
ENTER
key again to save it. Otherwise,
ENTER
key again to save it. Otherwise,
ENTER
key. After
ENTER