Table 9: Cli - Command Summary - Redline RDL-3000 User Manual

RDL-3000
Command
apply
arp
chgver
clear
del
enable
freq
generate
get
load
logout
new
ping
reboot
reset
save
script
set
show
snmpcommunity
snmptrap
upgrade
user
whoami
Command
Tab
?
CTRL-Z
exit
logout
70-00158-01-DRAFT
User Manual

Table 9: CLI - Command Summary

Description
Activate changes without overwriting saved configuration.
Add static ARP definitions to the RDL-3000 ARP table.
Change default version of firmware and reboot.
Clear commands.
Delete an ID.
Enable an ID.
Enter frequency ranges for autoscan and DFS.
Create DSA key for SSH locally on RDL-3000.
Display the value of a statistic or parameter.
Load commands.
End the current Telnet session.
Create a new ID.
Send a ping message from the RDL-3000 system.
Reboot the RDL-3000.
Reset the RDL-3000 statistics values.
Save the selected configuration settings.
Generate a configuration script.
View/modify a system parameter value.
View system compound objects (e.g., configuration).
View/modify the SNMP community settings.
View/modify the SNMP trap settings.
Upload a firmware binary image to the RDL-3000.
View/modify the user/password configuration.
Display login name for this Telnet session.
Table 10: CLI - Root Mode Commands
Description
When entering a command, hit the Tab key at any time to perform auto-
complete or view available options.
Use the '?' character to display help for any command or mode.
Example: From the root directory, enter the following command to list all
parameters that can be changed using the 'set' command:
set ?
Return to root mode.
Cancel command entry (alternative to backspace delete).
Return to parent node / mode.
all (exit all) Return to root mode.
Terminate this telnet session. May be entered from any mode.
Proprietary Redline Communications © 2010 Page 96 of 142 November 25, 2010