Status Screens - Redline RDL-3000 User Manual

RDL-3000
4.4

Status Screens

4.4.1 General Information
The General Information screen displays system and the Ethernet interface details. Click
to expand or
System
System Name: User-assigned name for this RDL-3000.
System Details: User-assigned system details information.
System Location: User-assigned system location information.
Contact: User-assigned contact information.
System SN: Displays the unique serial number identifying this unit.
Radio Type: Displays the factory installed radio type. Refer to section 8.1 System
Specifications.
System Mode: Operating mode of this unit:
PMP SC: Operating as a sector controller, the RDL-3000 begins transmitting
automatically, sends poll messages to locate and register remote subscribers, and
negotiates operating settings for each subscriber.
PMP SS: Operating as a subscriber, the RDL-3000 monitors the selected channel(s)
until polled by the sector controller.
Firmware Version: Displays the firmware version in use.
Time Since System Start: Elapsed time since the last system reboot/power-cycle.
Start Up Time: Time and date of the last system reboot/powered-cycle.
Current Time: Current time on the RDL-3000 internal clock. The time may be unavailable if
the SNTP (time server) feature is disabled. The screen will display 'N/A (GMT +0:00'.
70-00158-01-DRAFT
User Manual
to hide fields.
Fig. 28: Web - General Information Screen
Proprietary Redline Communications © 2010 Page 46 of 142 November 25, 2010