Wireless - Redline RDL-3000 User Manual

RDL-3000

Wireless

The following statistics are displayed for the downlink and uplink.
Burst Rate: The current uncoded burst rate for the link.
RSSI: Received signal strength indicator.
SINADR: Average signal to interference, noise, and distortion ratio.
Lost Frames: Number of frames lost.
Wireless Packets
The following statistics are displayed for the downlink and uplink.
Total: Total packets successfully processed over the wireless interface. Total does not
include discarded or errored packets.
Retransmitted: Total number of wireless packets that have been retransmitted over the
wireless interface.
Lost: Total packets discarded by the local system due to errors.
SINADR [dB]: Ratio of the average RF signal strength to interference, noise, and distortion.
DL: SINADR reported by the remote end unit.
UL: Received signal strength to noise measured by this unit.
RSSI [dBm]: Received signal strength indicator.
DL: RSSI reported by the remote end unit.
UL: Received signal strength measured by this unit.
Burst Rate [Mb/s]: The current uplink and downlink uncoded burst rate for the link.
DL: Operator-assigned maximum downlink burst rate setting.
UL: Operator-assigned maximum uplink burst rate setting.
Controls
Refresh: Click to update displayed statistics counters.
Reset: Click to reset displayed statistics counters.
70-00158-01-DRAFT
User Manual
Proprietary Redline Communications © 2010 Page 52 of 142 November 25, 2010