Save - Redline RDL-3000 User Manual

RDL-3000
Reset RDL-3000 values.
reset <stats>
Enter ID of specific
stats <id>
Reset statistics for a
5.3.16

save

Use the save command to copy edited parameter settings into non-volatile memory.
save [option] <Enter>
Copy parameters to non-volatile memory. Does not affect security settings.
save <config> <defaultconfig> <idtable> <snmp>
config
Save Ethernet, wireless, and user configuration settings.
defaultconfig
Overwrite parameters with the factory default settings. The following settings are not
affected: system name, location, details and contact, frequency list, SNMP configuration,
Idtable.
idtable
Save current idtable settings.
snmp
Save current SNMP settings.
5.3.17 script
Use the script command to save a file containing a string of Commands that can be
used to restore the current (active) configuration of the RDL-3000. Saved configuration
files can be viewed, copied, and/or modified using a text editor.
The file is saved in the TFTP default directory. The filename may be any name and
extension valid for the TFTP server platform. It is recommended use a filename that
uniquely identifies the RDL-3000 unit and the current date (e.g., Red80-AD0023-
080723.cfg). See 'load' command.
Create and save a script file containing all configuration settings.
script <server> <name>
server - TFTP server IP address
name - Script file name
Note: User account groups, usernames and passwords are not saved by the script
command. Accounts must be created manually by a user using Telnet or a Web
browser. The 'user' commands are interactive and can not be automated.
70-00158-01-DRAFT
Service
, Service
Service Group, Service, or Link
id - Specify an ID to reset statistics only for that
Default is to reset all statistics.
Proprietary Redline Communications © 2010
User Manual
Table 25: CLI - reset
Group Link
, or to be reset.
Table 26: CLI - save
Table 27: CLI - script
.
Service Group, Service, or Link
Page 105 of 142 November 25, 2010
.