Fig. 10: Pmp - Services (Subscriber) - Redline RDL-3000 User Manual

RDL-3000 User Manual
Services
Services are used to classify and process ingress and egress packets on the subscriber
Ethernet port, and to set wireless uplink and downlink rates for unicast traffic to/from the
host subscriber. Service settings include VLAN ID (tag), default priority, parent Link, and
parent Service Group. See 3.2.3: Setting Wireless Rates on page 27 for wireless rate
settings.

Fig. 10: PMP - Services (Subscriber)

If the Ethernet port ingress packet has a VLAN tag and the VID matches a Service
Group, the VLAN tag is removed (Q-in-Q) and the packet is forwarded over the wireless
interface.
Packets received over the wireless link are processed by the Service associated with the
originating parent Service Group. If the VLAN Tagging mode is 'tagged', a VLAN tag with
the Service VID is added to the packet (Q-in-Q), and the packet is forwarded over the
subscriber Ethernet port.
Note: At least one Service Group (sector controller) and one Service (subscriber) must
be defined before Ethernet traffic can be exchanged over the wireless interface.
70-00158-01-DRAFT Proprietary Redline Communications © 2010 Page 25 of 142 November 25, 2010