System Status - Redline RDL-3000 User Manual

RDL-3000
4.4.2

System Status

Click System Status in the main menu to view information about the wireless interface
and Ethernet port. This screen is identical for the sector controller and subscriber units.
Click
Wireless System
Current Tx Power: The current transmit power level.
Channel Frequency: The RF channel in-use.
OIR to CIR Ratio: (SC only) This value indicates if the system can meet the current
scheduling requirements. A positive value indicates that surplus bandwidth is available.
Wireless Security: Status of the wireless security selection.
Off - No wireless security.
On - Data sent over the wireless interface is encrypted.
DFS: Status of the DFS function.
Off: The DFS function is disabled.
On: DFS function is activated. See
DFS Action: The avoidance action to be taken when radar signals are detected. All DFS
actions are recorded in the event log.
None: The DFS feature is disabled.
Tx Off: Radio transmitter is disabled for 30 minutes.
Chg Freq: Radio transmitter is changed to a different RF frequency.
Status Code: Code indicating the status of the RDL-3000 system. Code '0000 0000'
indicates normal operation. Refer to section 6.2: Status Codes on page 119.
70-00158-01-DRAFT
to expand or to hide fields.
Fig. 29: Web - SC System Status Screen
Proprietary Redline Communications © 2010
User Manual
below.
DFS Action
Page 48 of 142 November 25, 2010