Services And Service Groups - Redline RDL-3000 User Manual

RDL-3000
3.2.2

Services and Service Groups

The RDL-3000 can operate as a VLAN-aware wireless L2 switch, with traffic being
classified and processed based on the packet VLAN ID. The RDL-3000 also provides a
Pass through mode that can be used to process traffic that is not matched to a known
VID, or simply to forward all traffic received on a port.
The following table lists the two methods to classify and process traffic received at the
RDL-3000 Ethernet port.
Type
Service
Service
Group
See the following sections for additional information about Service Groups and Services.
70-00158-01-DRAFT
User Manual
Table 2: Web - Operation - Traffic Classification
Function
Classify and process traffic received
and transmitted over the subscriber
Ethernet port.
Classify and process traffic received
and transmitted over the sector
controller Ethernet port.
Fig. 9: PMP - Services and Service Groups
Proprietary Redline Communications © 2010
Settings
Tagging Mode (VLAN/Pass through)
VLAN ID (tag)
Default Priority
Tagging Mode (VLAN/Pass through)
VLAN ID (tag)
Default Priority
Page 24 of 142 November 25, 2010