Notifier NFS2-3030 Operation Manual page 53

Smoke Detector
The area between the separator lines, lines 6-14, shows all information concerning the selected
point, which is N124L03D052 in the above example.
Line 6 - Line 6 displays two statistics that display for inputs (detectors and modules) and zones; in
the above example they are:
The first field displays the point control. There are three designations that could appear in this
field
AUTOMATIC
DISABLED
TROUBLE
The second field displays the point status. There are three designations that could appear in this
field.
INACTIVE
ACTIVE
PRE-ALARM
The device is a detector (an input device) so by referring to the descriptions below, it can be deter-
mined that the point is in a normal state.
Inputs: (detectors, monitor modules, zones)
If the point is not in trouble or disabled, and the point is automatically controlled by the panel, the
display will be one of the following:
If the point is disabled, the display will be one of the following. The Trouble Status field will
appear if the point is in trouble.
If the point is in trouble, the display will read:
*The field <Trouble Status> will contain one of the device trouble messages listed in Table 2.1,
"Point (Device) Troubles," on page 29.
Line 7 - The custom label for this point.
Line 8 - Continuation of the point's custom label, first zone, and device type.
Lines 9,10 - a display of all the zones that contain the current point being read. These lines will
have values in them only if the device is a detector.
Lines 11 through 14 - These lines display only if the device being read is a smoke, heat, or aspira-
tion detector. Refer to Section 1.8.2, "More Information", on page 19 for an explanation of these
fields.
Line 16 -
NFS2-3030 Operations Manual — P/N 52546:N1 06/20//2014
AUTOMATIC INACTIVE
Point Control
Designation
The point is being controlled automatically by the panel.
The point has been disabled by an outside source.
The point is in a trouble state and is no longer functioning automatically.
Point Status
Designation
The point is currently reporting no events.
The point is currently in an off-normal status.
The point is currently in a prealarm status.
AUTOMATIC INACTIVE
AUTOMATIC ACTIVE
AUTOMATIC PREALARM
DISABLED INACTIVE
DISABLED ACTIVE
DISABLED PREALARM
TROUBLE INACTIVE
TROUBLE ACTIVE
TROUBLE PREALARM
Press to return to the previous screen.
B A C K -
Description
Description
<Trouble Status>*
<Trouble Status>*
<Trouble Status>*
<Trouble Status>*
<Trouble Status>*
<Trouble Status>*
Read Status
53