Figure 5-36: Front Plate Assembly With Retaining Screw Locations - Miele CVA 610 Technical Information

Technical Information
JP35
JP25
JP39
JP41 (ribbon cable)
12. Disconnect the ground connection from the dispenser solenoid.
13. Disconnect the ground connection from the hot-water heater.
14. Remove the CPU electronic (with mounting bracket) and position it toward the
rear outside of the appliance.
15. Remove the steam heater from its support and position it outside the appliance.
16. Disconnect the water intake connection to the coffee/hot-water heater.
17. Remove the two coffee/hot-water heater screws (on the back of the front plate).
See Figure 5-36. Separate the heater from its support.
18. Remove the two screws securing the plastic hose support. Remove the plastic
support from inside the appliance. See Figure 5-36.

Figure 5-36: Front Plate Assembly with Retaining Screw Locations

19. Remove the two screws (Figure 5-37) and nuts (Figure 5-38) that secure the
grinder plate assembly to the top of the front plate assembly.
CVA 610/CVA 615 Coffee Systems
64