Table of Contents
Advertisement
Cleaning and care
Remove and clean the drip tray.
Remove the following parts from the
interior:
- water container
- drip tray
- maintenance container
- brew unit
- bean containers
Tip: Use your vacuum cleaner to
remove dry ground coffees.
Clean the interior and the inside of
the appliance door by hand with a
clean and slightly damp cloth/
microfiber cloth.
Wipe the interior and appliance door
dry using a soft cloth.
Put all the parts back in place,
including the drip tray.
Close the appliance door.
Cleaning the appliance front
If soiling is not removed promptly, it
could cause the surface to alter or
discolor.
Remove any soiling on the appliance
front straight away.
Make sure that water cannot get
behind the display.
Clean the appliance front after
descaling. If possible, wipe up any
spillages of descaling agent
immediately.
Tip: Before cleaning the control panel,
open the appliance door. This will
prevent accidental operation.
66
Clean the appliance front with a clean
and slightly damp cloth/microfiber
cloth.
Dry all surfaces with a soft cloth.
Tip: You can also use a Miele Microfiber
Cloth to clean the front.
Maintenance programs
The coffee machine has the following
maintenance programs:
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
Carry out the relevant maintenance
program when the prompt to do so
appears in the display. You can also
start maintenance programs at any time
so that the coffee machine does not
prompt mandatory cleaning at an
inconvenient time.
Tip: To save you having to empty the
drip tray too often, you can place the
maintenance container under the
central spout.
Opening the Maintenance menu
Touch the sensor control.
You can now select a maintenance
program.
Advertisement
Table of Contents
