Adjustment Slide Switch Frame Removal - Miele CVA 610 Technical Information

Technical Information
5. Remove the rear panel upwards.
Note: In some CVA 610 models, there may be an additional screw securing
the rear panel to the steam heater mounting bracket.
Figure 5-3: Rear Panel Removal
5.7

Adjustment Slide Switch Frame Removal

1. Open the door.
2. Pull off the slide switch controls.
3. Press the locking tabs inward with a small flathead screwdriver (Figure 5-4).
4. Remove the frame.
Figure 5-4: Removing the Adjustment Slide Switch Frame
CVA 610/CVA 615 Coffee Systems
40