Brew Unit Installation - Miele CVA 610 Technical Information

Technical Information
Figure 5-21: Brew Unit Connection Socket
5.28

Brew Unit Installation

Slide the brew unit into position in the appliance until the locking mechanism
engages with the drive mounting plate.
Note:
Do not press the part marked PRESS during the installation of the brew unit.
5.29 Brew Unit Cleaning Procedure
Note:
Clean the brew unit by hand only. The moving parts and the rubber
gaskets SHOULD NOT be cleaned in a dishwasher.
Lubricate the brew unit with silicone after every 500 cups (see Section
5.32).
1. Remove the waste container. The brew unit can only be removed after the waste
container has been removed from the appliance.
2. Grasp the brew unit by the handle and press the area marked PRESS. (Figure 5-
22, Item 1).
CVA 610/CVA 615 Coffee Systems
54