Water Tank - Miele CVA 610 Technical Information

CVA 610/CVA 615 Coffee Systems
In service mode, the top line of the display shows the switches that have
been activated. A "5" is displayed when the waste container is installed and
the switch is actuated. For further information, refer to Section 6.2.
Note:
On newer waste containers, an additional magnet is present to keep the
waste container attached to the metal frame inside the appliance. The
magnet for the waste container present switch remains in the same
location.
4.7

Water Tank

The water tank holds the water for the production of coffee, hot water and
steam. When the water tank is installed in position, the sealing ring presses
upward, allowing water to flow out without leaking.
Figure 4-9: Water Tank
When the tank is removed from the appliance, the spring closes the sealing
ring to ensure that water cannot flow from the tank when it is out of the
appliance for filling, etc.
4.8 Water Level Switch
The water level switch is located within the housing, in the area behind the
water tank cavity, as shown in Figure 4-10, Item 1.
Technical Information
23