Dispenser Assembly Installation - Miele CVA 610 Technical Information

CVA 610/CVA 615 Coffee Systems
Figure 5-17: Dispenser Assembly Components
1 Screw
2 Drip tray (select models)
3 Underlay
4 Outlet
5 Cable holder
5.21

Dispenser Assembly Installation

1. Slide the outlet (Figure 5-17, Item 7) onto the connection hose (Figure 5-17, Item 6).
2. Position the dispenser assembly (Figure 5-17, Item 9) in the cover (Figure 5-17,
Item 10).
3. Clip the outlet (Figure 5-17, Item 7) in the cover (Figure 5-17, Item 10).
Note:
The two screws for the coffee dispensing nozzle should be tightened only by hand
as they can easily be over-tightened.
4. Install the coffee dispensing nozzle in the frame.
5. Install the white panel and screws.
6 Connection hose
7 Outlet
8 Retainers
9 Dispenser assembly
10 Cover
49
Technical Information