Table 6-2: Service Mode Functions - Miele CVA 610 Technical Information

Technical Information
6. Brew unit present switch
7. Water tank level switch
8. Flow meter pulse (not always displayed)
A. Drip tray filled (water system fault)
4. Turn the selector switch to the desired function (see Table 6-2).
5. Release the SMALL COFFEE and HOT WATER buttons.
6. Press the applicable button to activate the function.
Selector Switch
Position
Lock
Program Mode
Light
On w/ Light
ON

Table 6-2: Service Mode Functions

Button
Large Coffee
Med Coffee
Small Coffee
Hot Water
Rinse
80
CVA 610/CVA 615 Coffee Systems
Function
Displays water temperature (in °C) for
water heater and steam heater.
Displays firmware version.
(not used)
(not used)
(not used)
Water pump on.
Steam solenoid on.
Hot-water valve on.
Displays, "5."
Displays, "4."
Button test "1" displayed.
Button test "2" displayed.
Button test "3" displayed.
Button test "5" displayed.
Button test "4" displayed.
Drive motor on until brew position switch is
contacted.
Drive motor on (reverse direction) until
home switch is contacted.
Grinder on.
(not used)
Dispenser solenoid on.
Hot water/coffee side heater element on.
Hot water/coffee upper heater element on.
Steam heater element on.
Front lights (CVA 615 only)
(not used)