View System Information - Inspur NF5180M5 User Manual

8.1.2 UEFI/Legacy Mode Switch
Login to the BIOS Setup interface, select "Advanced -> CSM Configuration". Press Enter,
to set the Boot Mode (UEFI Mode/Legacy Mode). Set the Option ROM execution mode of
Network, Storage, Video OPROM Policy and Other PCI devices, as shown in the following
figure.
At present, Inspur Purley platform servers are set to UEFI Mode by default. Compared with
Legacy mode, UEFI mode has many advantages: it supports boot from the GPT disk which
is larger than 2.2T, supports IPv6/IPv4 PXE boot, and provides UEFI Shell environment. This
option can be set according to customer's demand.
If the Boot Mode is set to Legacy Mode, the Option ROM execution mode of Network,
Storage, Video OPROM Policy and Other PCI devices must be set to Legacy.
If the Boot Mode is set to UEFI Mode, the Option ROM execution mode of Network must be set
to UEFI, and the Option ROM execution mode of Storage, Video OPROM Policy and Other PCI
devices is suggested to set to UEFI. If there are special requirements, it can be set to Legacy.

8.1.3 View System Information

Login to the BIOS Setup interface, and the Main menu displays the current system
information, including BIOS/BMC/ME version, CPU/PCH SKU/RC version, memory and other
information, as shown in the following figure.
34