Inspur NF5180M5 User Manual page 96

3) When there is no change in ME part, execute the command to update 16M BIOS:
AfuEfix64.efi BIOS.bin /b /p /n /x /k /l, and the process is as shown in the following figure.
After the update is complete, it is recommended to power cycle the system.
4) If there are any changes in ME part, execute the command to update 32M ME+BIOS:
AfuEfix64.efi BIOS.bin /b /p /n /x /k /l /me, and the process is as shown in the following
figure.
Parameter instructions:
- /B Program Boot Block
- /P Program main bios image
- /N Program NVRAM
- /X Do not check ROM ID
90