Inspur NF5180M5 User Manual page 12

Display
Controller Type
SAS
SAS3.0 Backplane
NIC
NIC Controller
Management
Management Chip
PCI Extension Slot
OCP
OCP Slot
HDD
HDD Type
External Storage Drive
Optical Drive
TF Card
Power
Specification
Power Input
Physical
External Dimensions
of Packing box
Size of Host Machine 435 width × 43 height × 750 depth (unit: mm)
6
Integrated in the Aspeed2500 chip, supports up to 1280*1024 resolution
Supports hot-plug SAS/SATA/SSD/NVME HDDs
Supports OCP/PCIE card
It integrates 1 independent 1000Mbps network interface, special for IPMI remote
management.
• Onboard: 1 PCI Express 3.0 ×16 slot + 1 PCI Express 3.0 ×24 slot, used to support
PCI-E Riser card.
• The Riser card supports horizontal inserted half-height and full-height cards.
• Standard configuration:
PCIE0 slot (CPU0 out): 1 Riser card, supporting 1 PCI Express 3.0 x16 slot
• Full configuration 1:
PCIE slot0 (CPU0 out): 1 Riser card, supporting 1 PCI Express 3.0 x16 slot
PCIE slot1 (CPU0/1 out): 1 Riser card, supporting 1 PCI Express 3.0 x8 slot (CPU0) +1
PCI Express 3.0 x16 slot (CPU1)
• Full configuration 2:
PCIE slot0 (CPU0 out): 1 Riser card, supporting 1 PCI Express 3.0 x16 slot
PCIE slot1 (CPU0/1 out): 1 Riser card, supporting 1 PCI Express 3.0 x8 slot (CPU0) +
4 NVME HDD interfaces (CPU1)
• Onboard: 1 Type A+ slot, 1 Type A+ B+ slot, and 1 Type C slot
• Supports OCP/PHY card
SAS, SATA, SSD, NVME, SATA M.2, PCIE M.2 HDDs
Supports external USB drive
Built-in TF card
Supports power supply of 550W/800W/1300W/1600W and above output power; 2
power modules; 1+1 redundancy; supports single-power/dual-power
Please refer to the power input on the nameplate label of the host.
651 width × 247 height × 1031 depth (unit: mm)