Operation on the Machine > Handling Destination
Choosing from the One Touch Key
In the destination screen for sending, select the One Touch Keys where the destination is registered.
NOTE
If the One Touch Keys for the desired destination is hidden on the touch panel, select [More] to display all One Touch
Keys. This procedure assumes that One Touch Keys have already been registered.
For more information on adding One Touch keys, refer to the following:
Adding a Destination on One Touch Key (page 3-35)
Choosing from the Speed Dial
Access the destination by specifying the 4-digit (0001 to 1000) One Touch Key number (speed dial).
In the destination screen for sending, select [No.] to display the numeric entry screen. Select the entry field, and use the
numeric keys to enter the speed dial number.
NOTE
If you entered the speed dial in 1 to 3-digit, select [OK].
5-45