Adjustments - Otto Bock B400 Instructions For Use Manual

5.2.1 Installing the fuse
1) Remove the fuse from the protective cover.
2) Open the fuse holder cover.
3) Centre the fuse on the spring contacts and plug it in.
4) Close the fuse holder cover until you feel it engage.
Fig. 1 Fuse holder, vertical (basic model); fuse holder, hori­
zontal
1 Fuse holder
2 Safety cap
3 Fuse
5.2.2 Charging the battery
See the power wheelchair instructions for use (user) for all
information regarding the charging process.
B400

6 Adjustments

6.1 Prerequisites
WARNING
Incorrect settings
Risk of falling, tipping over or improper user posture due to
incorrect settings
► Adjustments may only be carried out by qualified per­
sonnel instructed by the manufacturer.
► Check for safe function before delivering the product.
CAUTION
Unsecured screw connections
Risk of pinching, crushing, tipping over, falling of user
► After all adjusting/readjusting work, retighten the
mounting screws/nuts firmly. Observe any torque set­
tings which may be specified.
► Any time you loosen a screw connection with thread
lock, replace it with a new screw connection or secure
the old screw connection with medium strength thread
locker (e.g. Loctite 241
Fine adjustments and setting changes to match the concrete
physical and mental condition of the user should always be
made in the user's presence.
All parts of the product should be cleaned thoroughly before
adjustments are made.
Adjustments
®
).
Ottobock | 13