Preparation For Use; Tools Required; Assembly; Adjustments - Otto Bock Ventus Instructions For Use Manual

Preparation for Use

5 Preparation for Use

5.1 Tools required

The following tools are required for fine adjustments/settings:
• Allen keys in sizes 3 – 5 mm
• Ring and open-ended wrenches in sizes 10, 13, 19, 24 and 27
• Socket spanners in sizes 10, 13 and 19
• Phillips screwdriver, size 2
• Flat screwdriver, size 3
• Torque wrench (measurement range 5 – 50 Nm)
• Measurement equipment: rule, spirit level
• Liquid thread locker, "medium" and "strong"

5.2 Assembly

CAUTION
Exposed pinch points
Risk of crushing or pinching the fingers due to incorrect handling
► When folding out the backrest, only grip by the specified components.
CAUTION
Incorrect fitting of the rear wheels
Risk of falling or tipping due to wheels coming loose
► After every assembly, check the proper mounting of the rear wheels. The wheel axles must be securely locked
in the fitting.
INFORMATION
For details of weights of the individual parts, see section "Technical Data".
1) Push the rear wheels into the wheel brackets. The quick-release axles must not be able to be removed after the
pushbutton has been released.
2) If necessary, position the backrest upright and allow the latch to engage.
3) Rotate the side panels into position and insert them into the supports.
4) If necessary, insert the calf strap.
5) Place the cushion on to the seat.

6 Adjustments

6.1 Prerequisites

WARNING
Incorrect settings
Risk of falling, tipping over or improper user posture due to incorrect settings
► Adjustments may be carried out only by qualified personnel.
► Only the settings described in these instructions for use may be carried out.
► Settings may only be changed within the allowable adjustment ranges; otherwise, the stability of the product
may be impaired (see this chapter and the chapter "Appendixes"). If you have questions, contact the manu­
facturer's service (see back cover for addresses).
► Only conduct tests in the presence of an assistant.
► Unless expressly described, you may not change any settings with a person sitting in the product.
► Secure the user against falling out during all tests.
► Before testing setting changes with the user seated, firmly tighten all screw connections.
► Check for safe function before delivering the product.
8 | Ottobock Ventus