Otto Bock B400 Instructions For Use Manual page 9

► Programming may only be performed by qualified per­
sonnel trained by the manufacturer. The manufacturer
of the product and the control unit manufacturer are
not liable in case of damage caused by programming
which was not performed properly and/or which was
not adjusted properly according to the user's abilities.
► Note that modified parameter settings in the configura­
tion can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking
or joystick settings can lead to unexpected and there­
fore uncontrollable driving characteristics and cause
an accident.
► After configuration/programming is complete, the user
must test the driving characteristics of the product
under the supervision of the qualified personnel.
3.5 Further Information
INFORMATION
The serial number required for further inquiries and orders
is found on the nameplate (see section "Nameplate").
B400
Safety
Ottobock | 9