Preparing For Transport - Otto Bock B400 Instructions For Use Manual

Maintenance / repair

7.2.2 Preparing for transport

1) Lift the power wheelchair and place it in its transport
location.
INFORMATION: To lift or carry the power wheel­
chair, use the eyebolts in the front and back of the
frame.
2) Turn the control unit off.
3) Engage the brake.
4) Use the eyebolts and cargo straps to attach the power
wheelchair to the transport vehicle.
Fig. 2 Eyebolts
1 Eyebolt, front
2 Eyebolt, rear
16 | Ottobock
7.3 Handover
WARNING
Lack of instruction
Risk of falling, tipping over due to lack of knowledge
► Instruct the user or the attendant in the proper use of
the product when handing it over.
The following steps must be performed for the safe delivery
of the wheelchair:
• Have the user get into the wheelchair and perform a trial
seat fitting. Pay special attention to proper positioning
according to medical considerations.
• The user and any attendants must be instructed in safe
use of the wheelchair. In particular, the enclosed
instructions for use (user) are to be used.
• The instructions for use (user) must be issued to the
user or an attendant during handover of the wheelchair.
• The user should acknowledge that they have been
instructed in how to use the product and were informed
of the residual risks.
8 Maintenance / repair
The manufacturer recommends regular maintenance of the
product every 12 months.
The instructions for use (user) contain further information on
cleaning/disinfection as well as maintenance/repair by the
user.
B400