Save Scanned Data To A Folder As A Pdf File - Brother MFC-J3930DW Online User's Manual

Hide thumbs Also See for MFC-J3930DW:

Table of Contents

Scan Using the Scan Button on Your Brother Machine

Save Scanned Data to a Folder as a PDF File

Scan documents and save them to a folder on your computer as PDF files.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent

changes, use Brother's ControlCenter software.

>> MFC-J3530DW

>> MFC-J3930DW

1. Load your document.

2. Press [Scan] > [to PC] > [to File].

3. If the machine is connected over the network, press a or b to display the computer where you want to send

data, and then press the computer name.

If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then

4. Do one of the following:

To change the settings, press [Options], and then go to the next step.

Press [Start] to start scanning without changing additional settings.

The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to

complete the scanning job.

5. Select the scan settings you want to change, and then press [OK].

Document Size

ADF Auto Deskew

Select the scan type for your document.

Select the scan resolution for your document.

Select the file format for your document.

Select your document size.

Select the brightness level.

Select the contrast level.

Correct any skewed documents when they are scanned using the ADF.

> Save Scanned Data to a Folder as