Save Scanned Data To A Folder As A Pdf File - Brother MFC-J4340DW Online User's Manual
Hide thumbs
Also See for MFC-J4340DW:
- Quick setup manual (2 pages) ,
- Online user's manual (623 pages) ,
- Quick setup manual (2 pages)
Table of Contents
Advertisement
Home >
Scan
>
Scan Using the Scan Button on Your Machine
File
Save Scanned Data to a Folder as a PDF File
Scan documents and save them to a folder on your computer as PDF files.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother iPrint&Scan.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [to PC] option, and then press OK.
4. Press a or b to select the [to File] option, and then press OK.
5. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD message prompts you to enter a password, use the control panel to enter the password for the
computer, and then press OK.
6. Do one of the following:
•
To change the settings, go to the next step.
•
To use the default settings, press Mono Start or Colour Start.
[Colour Setting] depends on the default settings. Pressing Mono Start or Colour Start does not allow
you to change the settings.
7. Press a or b to select the [Scan Settings] option, and then press OK.
To use the [Scan Settings] option, you must connect a computer with Brother iPrint&Scan installed to
the machine.
8. Press a or b to select the [Set at Device] option, and then press OK.
9. Select the scan settings you want to change, and then press OK.
Option
Colour Setting
Resolution
Description
Select the scan colour format of your document.
Select the scan resolution for your document.
> Save Scanned Data to a Folder as a PDF
105
Advertisement
Table of Contents
