Brother MFC-J3930DW Online User's Manual page 137

Hide thumbs Also See for MFC-J3930DW:

Table of Contents

ADF Auto Deskew

(Available only for certain models)

Skip Blank Page

(Available only for certain models)

Remove Background Colour

To save the settings as a shortcut, press [Save as Shortcut]. You will be asked if you want to

make this a One Touch Shortcut. Follow the LCD instructions.

7. Press [Start].

The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete

the scanning job.

1. Load your document.

3. Swipe left or right or press d or c to display

The icon moves to the middle of the touchscreen and is highlighted in blue.

5. Press [to Image].

6. If the machine is connected over the network, swipe up or down or press a or b to display the computer

where you want to send the data, and then press the computer name.

If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then

7. Do one of the following:

To change the settings, press [Options], and then go to the next step.

Press [Start] to start scanning without changing additional settings.

The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to

complete the scanning job.

8. To scan both sides of the document, press [2-sided Scan], and then select the document type.

2-sided Scan: Long

2-sided Scan: Short

Select the contrast level.

Correct any skewed documents when they are scanned using the ADF.

When On is selected, blank pages are skipped.

Change the amount of background colour that is removed.

Scan the document so that the pages are read by flipping them on the long

Scan the document so that the pages are read by flipping them on the short