Brother MFC-J3930DW Online User's Manual page 253

Hide thumbs Also See for MFC-J3930DW:

Table of Contents

After you have finished choosing new options, you can save them by pressing the [Save as Shortcut]

5. Press [Mono Start] or [Colour Start].

To stop copying, press

1. Make sure you have loaded the correct size paper in the paper tray.

2. Load your document.

The touchscreen displays:

4. Change the copy settings, if needed.

When you load paper other than A4 size Plain Paper, you must change the [Paper Size] and [Paper

Type] settings by pressing [Options].

2 in 1 ID Copy

Current setting

Enter the number of copies in one of the following ways:

Press - or + on the touchscreen.

to display the keyboard on the touchscreen, and then enter the

number of copies using the touchscreen keyboard. Press OK.

Enter the number of copies using the dial pad.

to display a red check mark.

You can start 2 in 1 ID Copy.

You can copy with a variety of settings by pressing the buttons that are already set up

in the machine.

To select these settings, press

to change the copy settings for the next copy only.

When you have finished changing settings, press OK.

Press the following icons to change these settings for the next copy only:

, and then swipe left or right or press d or c.