Brother MFC-J3930DW Online User's Manual page 682

Home > Machine Settings
Sleep Mode Countdown
Set Sleep Mode Countdown
The Sleep Mode (or Power Save Mode) setting can reduce power consumption. When the machine is in Sleep
Mode, it acts as though it is turned off. The machine will wake up and start printing when it receives a print job or
a fax. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode.
• The timer will restart if any operation is carried out on the machine, such as receiving a fax or a print job.
• The factory setting is five minutes.
• When the machine goes into Sleep Mode, the LCD backlight turns off.
>> MFC-J3530DW
>> MFC-J3930DW
MFC-J3530DW
1. Press [Settings] > [All Settings] > [General Setup] > [Sleep Mode].
2. Press a or b to display the [1Min], [2Mins], [3Mins], [5Mins], [10Mins], [30Mins], or [60Mins]
option, and then press the option you want.
3. Press .
MFC-J3930DW
1. Press [Settings] > [All Settings] > [General Setup] > [Sleep Mode].
2. Swipe up or down or press a or b to display the [1Min], [2Mins], [3Mins], [5Mins], [10Mins],
[30Mins], or [60Mins] option, and then press the option you want.
3. Press .
Related Information
• General Settings
• Set the Machine to Power Off Automatically
> Change Machine Settings from the Control Panel > General Settings > Set
675