Brother MFC-J3930DW Online User's Manual page 414

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct > Configure Your Wi-Fi Direct Network
Push Method
Configure Your Wi-Fi Direct Network Using the One-Push Method
>> MFC-J3530DW
>> MFC-J3930DW
MFC-J3530DW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Push Button].
2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then Press [OK].] appears. Press [OK] on your
Brother machine.
This will start the Wi-Fi Direct setup.
3. Do one of the following:
• When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
• When your Brother machine is not the Group Owner (G/O), it will display available device names with
which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect. Search
for available devices again by pressing [Rescan].
If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi
Direct network setup.
MFC-J3930DW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will be displayed. Press
[OK] to connect.
1. Press [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Push Button].
2. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when
[Activate Wi-Fi Direct on other device. Then Press [OK].] appears. Press [OK] on your
Brother machine.
This will start the Wi-Fi Direct setup.
3. Do one of the following:
• When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine
directly.
• When your Brother machine is not the Group Owner (G/O), it will display available device names with
which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect. Search
for available devices again by pressing [Rescan].
If your mobile device connects successfully, the machine displays the message [Connected]. You have
completed the Wi-Fi Direct network setup.
> Configure Your Wi-Fi Direct Network Using the One-
> Use
407