Brother MFC-J3930DW Online User's Manual page 705

[Settings] > [All Settings] > [General Setup]
Level 1 Level 2
Maintenance Improve Print
Quality
Print Head
Cleaning
Remove Paper
Scraps
Ink Volume
Ink Cartridge
Model
Print Setting
Options
Paper Type -
Paper Size -
Check Paper -
Quiet Mode
-
Volume Ring
Beep
Speaker
LCD Settings Backlight
Dim Timer
Screen Settings Scan Screen
Notice Settings Document Alert
Copy Tip
Scan Result(Skip
Blank Page)
Keyboard -
Settings
Sleep Mode -
Auto Power Off -
Level 3 Descriptions
- Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
- Clean the print head according to the LCD
instructions.
- Remove a piece of paper in the machine according
to the LCD instructions.
- Check the available ink volume.
- Check your ink cartridge numbers.
Reduce
Reduce smudging on the paper or paper jams during
Smudging printing.
Reduce Reduce uneven lines on the paper during printing.
Uneven
Lines
Slow Drying Use this setting when printing with a type of plain
Paper paper on which the ink dries very slowly.
- Set the type of paper in the paper tray.
- Set the size of paper in the paper tray.
- Check the paper type and paper size when you pull
the tray out of the machine.
- Decrease printing noise.
- Adjust the ring volume.
- Adjust the beeper volume.
- Adjust the speaker volume.
- Adjust the brightness of the LCD backlight.
- Set how long the LCD backlight stays on after the
last finger press.
- Set the default Scan screen settings.
- Displays the alert when a document is left on the
scanner glass.
- Displays the document placement guidance when
you open the document cover.
- Displays a scan result of skip blank page when
finished.
- Select the type of keyboard for the LCD.
- Select how long the machine must be idle before it
goes into Sleep Mode.
- Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
698