Error Messages When Using The Brother Web Connect Feature - Brother MFC-J3930DW Online User's Manual

Home > Troubleshooting
Web Connect Feature

Error Messages When Using the Brother Web Connect Feature

Your Brother machine displays an error message if an error occurs. The most common error messages are
shown in the following chart.
You can correct most errors yourself. If, after reading this table, you still need help, the Brother Solutions Center
offers the latest FAQs and troubleshooting tips.
Visit us at support.brother.com.
Connection Error
Error Messages
(MFC-J3530DW)
Connection Error 02
Network is not connected.
Check that the machine is
connected to the network.
(MFC-J3930DW)
Connection Error 02
Network is not connected.
Check that the machine is
connected to the network.
(MFC-J3530DW)
Connection Error 03
Connection failed to server.
Check network settings.
(MFC-J3930DW)
Connection Error 03
Connection failed to server.
Check network settings.
(MFC-J3530DW)
Connection Error 07
Connection failed to server.
Set the correct Date&Time.
(MFC-J3930DW)
Connection Error 07
Connection failed to server.
Set the correct Date&Time.
> Error and Maintenance Messages
Cause
The machine is not connected to a
network.
• Network or server settings are
incorrect.
• There is a problem with the
network or server.
Date and time settings are incorrect.
> Error Messages When Using the Brother
Action
• Verify that the network connection
is good.
• If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
• Confirm that network settings are
correct, or wait and try again later.
• If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
Set the date and time correctly. Note
that if the machine's power cord is
disconnected, the date and time
settings may have reset to factory
settings.
577