Adjustments And Settings - Matco Tools FixAdvisor MD70 Operating Instruction

ADJUSTMENTS AND SETTINGS

The FixAdvisor lets you make several adjustments and settings to
configure the FixAdvisor for your particular needs. The following
adjustments and settings are available:
Adjust Brightness: Adjusts the brightness of the display screen.
Audible Tone: Turns the FixAdvisor's audible tone "on" and "off."
When turned "on," a tone sounds each time a button is pressed.
Display Backlight: Turns the display backlight on and off.
Select Language: Sets the display language for the FixAdvisor to
English, French or Spanish.
Unit of Measurement: Sets the Unit of Measurement for the
FixAdvisor's display to US or Metric.
Adjustments and settings can be made when the FixAdvisor is
connected or not connected to a vehicle.
To enter the Tool Settings Menu:
1. Press and release the M button.
The Menu displays.
2. Use the UP
necessary, to highlight Tool Settings, then
press the ENTER
The Tool Settings Menu displays.
3. Make adjustments and settings as described
in the following paragraphs.
Adjusting Display Brightness
1. Use the UP
as necessary,
Brightness in the Tool Settings Menu,
then press the ENTER
The Adjust Brightness screen displays.
The Brightness field shows the current
brightness setting, from 1 to 5.
2. Press the UP
brightness of the display (make the display
darker).
3. Press the DOWN
the brightness of the display (make the
display lighter).
4. When the desired brightness is obtained, press the ENTER
button to save your changes and return to the Tool Settings Menu.
MD70
About the FixAdvisor
and DOWN buttons, as
button.
and DOWN
to highlight
button.
button to decrease the
button to increase
ADJUSTMENTS AND SETTINGS
buttons,
Adjust
™
7