Matco Tools FixAdvisor MD70 Operating Instruction page 46

Using the FixAdvisor
VIEWING OEM ENHANCED DTCs
Chrysler/Jeep OEM Enhanced DTCs
When OEM Enhanced is selected from the System Menu (and the
manufacturer selected during the code retrieval procedure was Chrysler
or Jeep), the Chrysler Enhanced menu displays. You may view either
"ECM/PCM DTCs" or "Transmission DTCs."
1. Use the UP
as necessary, to highlight the desired
option, then press the ENTER
Transmission DTCs are not sup-
ported on most Chrysler/Jeep ve-
hicles manufactured prior to 2002.
A "One moment please" message
displays while the FixAdvisor retrieves
the selected DTCs.
If the FixAdvisor fails to link to the
vehicle's computer, a "Linking Failed"
message shows on the FixAdvisor's
display.
- Verify the ignition is ON, then press
the POWER/LINK
continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 11 for a description
of LCD display elements.
A visible
FixAdvisor is being powered through the
vehicle's DLC connector.
The upper right hand corner of the
display shows the number of the code
currently being displayed, the total
number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are shown
in the lower section of the LCD display.
44
™
and DOWN
icon indicates that the
I/M MONITOR STATUS icons are not displayed when
viewing enhanced DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
to view the additional information.
buttons,
button.
button to
and buttons, as necessary,
MD70