Matco Tools FixAdvisor MD70 Operating Instruction page 11

3. When the desired display language is highlighted, press the ENTER
button to save your changes and return to the Tool Settings
Menu (shown in the selected display language).
Setting the Unit of Measurement
1. Use the UP
as necessary,
Measurement in the Tool Settings Menu,
then press the ENTER
2. Press the UP
necessary, to highlight the desired Unit of
Measurement.
3. When the desired Unit of Measurement
value is selected, press the ENTER
button to save your changes.
Exiting the Tool Settings Menu:
1. Press the M button to return to the Main Menu.
MD70
About the FixAdvisor
and DOWN buttons,
to highlight Unit
button.
or DOWN button, as
ADJUSTMENTS AND SETTINGS
of
™
9