Live Data Playback - Matco Tools FixAdvisor MD70 Operating Instruction

All three LEDs will blink for three seconds to indicate that Live
Data is being recorded, and a "One moment please. . ."
message shows on the display, along with the number of the
frame being recorded.
When
confirmation screen displays, asking if
you would like to view the recorded
data. Use the UP
buttons, as necessary, to select Yes or
No, as desired, then press the ENTER
button.
If Yes is selected, the Scan Tool enters "Playback" mode from
which you can view a frame-by-frame playback of recorded
Live Data (see LIVE DATA PLAYBACK on page 69 for details).
If No is selected, the display returns to the "Live Data View"
mode.
10. You can exit the "Record Live Data Mode" at any time by pressing and
holding the M button until the Main Menu displays.
If desired, you can transfer the recorded Live Data information
to a personal computer using the optional software (see
instructions included with the software for more information).

LIVE DATA PLAYBACK

Once Live Data has been recorded, it is saved in the Scan Tool's
memory. You can view recorded Live Data immediately after recording
by selecting Yes from the Record Live Data confirmation screen (see
RECORDING (CAPTURING) LIVE DATA on page 64 for more
information), or you can view it later using the "Playback" function.
1. Press and release the M button.
The Main Menu displays.
2. Use the UP
as necessary, to highlight Live Data Menu,
then press the ENTER
The Live Data Menu displays.
3. Use the UP
as necessary, to highlight Playback Live
Data, then press the ENTER
MD70
recording is complete,
and DOWN
and DOWN
button.
and DOWN
Live Data Mode
LIVE DATA PLAYBACK
a
buttons,
buttons,
button.
69