I/M Readiness Testing - Matco Tools FixAdvisor MD70 Operating Instruction

To erase OEM enhanced, ABS or SRS DTCs: Press the
SYSTEM MENU
the UP
the desired option, then press the ENTER
the appropriate Code Retrieval procedure (see page 42 for more
information) and then proceed to step 3.
3. Press and release the ERASE
shows on the display.
If you are sure you want to proceed,
use the UP
as necessary, to highlight Yes, then
press
continue.
If you do not want to proceed, use the
UP
necessary, to highlight No, then press
the ENTER
erase procedure.
4. If you chose to erase DTCs, a progress screen displays while the
erase function is in progress.
If the
confirmation message shows on the
display. Press the POWER/LINK
button to return to the DTC screen.
If the erase was not successful, an
advisory
display.
Erasing DTCs does not fix the problem(s) that caused the code(s)
to be set. If proper repairs to correct the problem that caused the
code(s) to be set are not made, the code(s) will appear again (and
the check engine light will illuminate) as soon as the vehicle is
driven long enough for its Monitors to complete their testing.

I/M READINESS TESTING

I/M is an Inspection and Maintenance program legislated by the
Government to meet federal clean-air standards.
The program requires that a vehicle be taken periodically to an
Emissions Station for an "Emissions Test" or "Smog Check," where the
emissions-related components and systems are inspected and tested
for proper operation. Emissions Tests are generally performed once a
year, or once every two years.
MD70
button to display the System menu. Use
and DOWN
and DOWN
the ENTER
and DOWN
button to cancel the
erase was successful,
message shows
Using the FixAdvisor
I/M READINESS TESTING
buttons, as necessary, to highlight
button. A confirmation message
buttons,
button to
buttons, as
a
on the
™
button. Perform
55