Table of Contents
Advertisement
1. Use the UP
the desired option, then press the ENTER
A "One moment please" message
displays while the FixAdvisor retrieves
the selected DTCs.
If the FixAdvisor fails to link to the
vehicle's computer, a "Linking Failed"
message shows on the FixAdvisor's
display.
-
Verify the ignition is ON, then press
the POWER/LINK
continue.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 11 for a description
of LCD display elements.
A visible
through the vehicle's DLC connector.
The upper right hand corner of the
display shows the number of the code
currently being displayed, the total
number of codes retrieved.
The Diagnostic Trouble Code (DTC)
and related code definition are shown
in the lower section of the LCD display.
The FixAdvisor will display a code only if
codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently
computer" is displayed. Press
SYSTEM
System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the FixAdvisor's communication link with the vehicle's computer
disconnects.
POWER/LINK
MD70
and DOWN
icon indicates that the FixAdvisor is being powered
I/M MONITOR STATUS icons
are
not
displayed
viewing enhanced DTCs.
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the
to view the additional information.
stored
in
the
button to return to the
To
re-establish
button again.
Using the FixAdvisor
VIEWING OEM ENHANCED DTCs
buttons, as necessary, to highlight
button.
button to
when
and
buttons, as necessary,
vehicle's
the
communication,
™
press
the
49
Hide quick links:
Advertisement
Table of Contents
