Matco Tools FixAdvisor MD70 Operating Instruction page 40

Using the FixAdvisor
CODE RETRIEVAL PROCEDURE
The Select Make screen displays.
10. Use the UP
necessary, to highlight the desired vehicle
make, then press the ENTER
To view other pages of the list, select Next
Page.
The Select Model screen displays.
11. Use the UP
necessary, to highlight the desired vehicle
model, then press the ENTER
To view other pages of the list, select Next
Page.
The Select Engine screen displays.
12. Use the UP
necessary, to highlight the desired engine
size, then press the ENTER
The
displays.
13. Use the UP
necessary,
transmission type, then press the ENTER
button.
The Select System screen displays.
14. Use the UP
necessary, to highlight Global OBD2 + FIX
Assist, then press the ENTER
A progress screen displays while the
codes are retrieved.
15. After approximately 10~60 seconds, the
FixAdvisor will retrieve and display any
Diagnostic Trouble Codes, Monitor Status
and Freeze Frame Data retrieved from the
vehicle's computer memory.
If the FixAdvisor fails to link to the
vehicle's computer a "Linking Failed"
message shows on the Scan Tool's
display.
- Verify the connection at the DLC,
and verify the ignition is ON.
- Turn the ignition OFF, wait 5
seconds, then turn back ON to reset
the computer.
38
™
and DOWN
and DOWN
and DOWN
Select Transmission
and DOWN
to highlight
and DOWN
buttons, as
button.
buttons, as
button.
buttons, as
button.
screen
buttons, as
the desired
buttons, as
button.
MD70