Matco Tools FixAdvisor MD70 Operating Instruction page 47

The FixAdvisor will display a code only if
codes are present in the vehicle's
computer memory. If no codes are
present, a "No Enhanced DTC's are
presently
computer"
SYSTEM
System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the FixAdvisor's communication link with the vehicle's computer
disconnects.
POWER/LINK
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the FixAdvisor returns to the Chrysler Enhanced
menu.
To view additional enhanced DTCs, repeat steps 1 through 4, above.
To exit the enhanced mode, press the SYSTEM
FixAdvisor returns to the System Menu.
Ford/Mazda OEM Enhanced DTCs
Mazda Enhanced DTCs are available for Mazda-branded
Ford vehicles only.
When OEM Enhanced is selected from the System Menu (and the
manufacturer selected during the code retrieval procedure was Ford or
Mazda), the Ford/Mazda Enhanced menu displays. You may view DTCs
for either the "Continuous Memory Test", "KOEO (Key On Engine Off)
Test" or "KOER (Key On Engine Running) Test."
1. Use the UP
as necessary, to highlight the desired
option, then press the ENTER
When choosing to view KOER
Test DTCs, start the vehicle's
engine
selection.
A "One moment please" message
displays, while the FixAdvisor retrieves
the selected DTCs.
If the KOER Test was selected, and
the vehicle's engine is not running, an
advisory
FixAdvisor's display.
- Press the SYSTEM
return to the System Menu.
MD70
Using the FixAdvisor
stored in the
is displayed. Press
button to return to the
To re-establish
button again.
and DOWN
before making
message shows
VIEWING OEM ENHANCED DTCs
vehicle's
the
communication,
buttons,
button.
your
on the
button to
™
press the
button. The
45