Matco Tools FixAdvisor MD70 Operating Instruction page 43

A. A PENDING CODE IS PRESENT – If
the yellow LED is illuminated, it may
indicate a Pending code is present.
Check the FixAdvisor's display for
confirmation. A Pending code is con-
firmed by the presence of a numeric
code and the word PENDING on the
Scan Tool's display.
B. MONITOR NOT RUN STATUS – If
the FixAdvisor's display shows a zero
(indicating there are no DTC's present
in the vehicle's computer memory),
but the yellow LED is illuminated, it
may be an indication that some of the
Monitors supported by the vehicle
have not yet run and completed their
diagnostic
FixAdvisor's display for confirmation.
All Monitor icons that are blinking
have not yet run and completed their
diagnostic testing; all Monitor icons
that
completed their diagnostic testing.
Red LED – Indicates there is a prob-
lem with one or more of the vehicle's
systems. The red LED is also used to
indicate that DTC(s) are present (dis-
played on the FixAdvisor's screen). In
this case, the Malfunction Indicator
(Check Engine) lamp on the vehicle's
instrument panel will be illuminated.
- If the correct manufacturer is shown,
use the UP
buttons, as necessary, to highlight
Yes, then press the ENTER
button to continue.
- If the correct manufacturer is not
shown, use the UP
highlight No, then press the ENTER
If the manufacturer for your vehicle is not listed, use the UP
and DOWN
manufacturer and press the ENTER
DTC information.
If the definition for the currently
displayed code is not available, an
advisory message shows on the
Scan Tool's LCD display.
MD70
testing.
are solid have
and DOWN
buttons, as necessary,
button to return to the list of vehicle manufacturers.
buttons, as necessary, to select Other
Using the FixAdvisor
CODE RETRIEVAL PROCEDURE
Check the
run and
Yo u h ave s e l e c t e d :
I s t h i s c o r r e c t ?
Ye s
N o
and DOWN
to
A c u ra
button for additional
41
™