Matco Tools FixAdvisor MD70 Operating Instruction page 69

- If you chose to cancel the recording
process
completed, an advisory message
displays, asking if you would like to
view the Live Data list that was
recorded. Use the UP
DOWN
select Yes or No, as desired, then
press the ENTER
- If the Live Data recording process
was not successful, an advisory
message shows on the Scan Tool's
display. Press the M button to return
to the Record Live Data menu.
If Yes is selected, the Scan Tool enters
"Playback" mode from which you can
view a frame-by-frame playback of
recorded Live Data (see LIVE DATA
PLAYBACK on page 69 for details). If No is selected, the display
returns to the "Live Data View" mode.
10. You can exit the "Record Live Data Mode" at any time by pressing
and holding the M button until the Main Menu displays.
If desired, you can transfer the recorded Live Data information
to a personal computer using the optional software (see
instructions included with the software for more information).
Record by Manual Trigger
This option lets you select the precise time at which the Live Data
recording will occur. Record by Manual Trigger can be a very valuable
diagnostic tool when troubleshooting intermittent problems that do not
meet the requirements for a DTC to set. Even though a DTC is not
present, the intermittent problems will sometimes manifest themselves
briefly, for a few fractions of a second and/or only at certain vehicle
speeds or vehicle operating conditions.
1. While linked to the vehicle, start the
engine, then press and release the M
button.
The Main Menu displays.
2. Use the UP
as necessary, to highlight Live Data Menu,
then press the ENTER
The Live Data Menu displays.
3. Use the UP
as necessary, to highlight Record Live
Data, then press the ENTER
MD70
RECORDING (CAPTURING) LIVE DATA
before recording
buttons, as necessary, to
button.
and DOWN buttons,
button.
and DOWN buttons,
button.
Live Data Mode
was
and
67